- Tests whether fluorescent lamps and light bulbs are operational prior to installation or removal
- Features built-in VolTect alert to verify voltage presence and eliminate the need to carry a separate voltage detector
- Offers single-handed, one-button operation for all lamp tests
- Provides a pin test to check the continuity of the bulb’s electrodes
- Features ultra-compact design for easy portability
- Includes a 48 removable, fully retractable antenna to test lights without climbing a ladder
- Emits visual and audible alerts for pin and voltage test functions
- Works with all fluorescent light bulbs: T2, T4, T5, T8, T9, T10, T12
- Includes 48 antenna, adaptor plate, users manual, battery and carrying case
Spesifications:
| Specifications | |
| Compatible lamps | T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs |
| Test voltage | Approximately 3 kV / 280 kHz |
| Field strength | Approximately 100 μV/m at 260 - 300 kHz |
| Maximum antenna length | 48" |
| Filament test | T2, T4, T5, T8, T9, T10, T12 |
| VolTect™ non-contact voltage detection | AC 90 V to AC 600 V, 50/60 Hz CAT II 300 V, CAT I 600 V |
| Supplied with | 48" antenna, adaptor plate, users manual, battery and carrying case |
| Specifications | Range |
| Compatible lamps | T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs |
| Test voltage | Approximately 3 kV / 280 kHz |
| Field strength | Approximately 100 μV/m at 260 - 300 kHz |
| Maximum antenna length | 48" |
| Filament test | T2, T4, T5, T8, T9, T10, T12 |
| VolTect™ non-contact voltage detection | AC 90 V to AC 600 V, 50/60 Hz CAT II 300 V, CAT I 600 V |
| Non-contact voltage sensitivity with probe tip (typical) | LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac |
| Drop proof | 36" |
| Operating time | One second ON, one second OFF for maximum five cycles and wait for 1 minute before taking another measurement |
| Operating temperature | -10°C to +50°C (14°F to 122°F) ≤ 85% RH |
| Storage temperature | -10°C to +50°C (14°F to 122°F) ≤ 85% RH |
| Operating altitude | Up to 2000 meters |
| Battery | One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent. |
| Battery life | Up to 500 tests (Alkaline typically) |
| Dimensions (L x W x H) | Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna |
| Weight | Approximately 80 g (0.18 lb) with battery installed, excluding 48" antenna |
| Safety compliance | IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04 |
| EMC compliance | IEC 61326-1 |
| Certification | CSA and CE |
| Calibration | NA |
0 komentar:
Posting Komentar