The rugged Amprobe INSP-3 Wiring Inspector Circuit Tester verifies in seconds whether a building’s wiring (including voltage drop under load) complies with electrical code. This saves time and money by eliminating guess work. The large display shows all relevant test data so you can quickly identify issues with splices, connections, and conductor quality that are crucial to safety and performance, without scrolling or switching screens. Select a 10, 15, or 20 amp load on the electricity tester then read the results. A flashing screen clearly indicates incorrect wiring or failures. This wire tester won’t trip circuit breakers or blow fuses during the test.
Features:
Presents relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) on a single large display to save operator time. No scrolling or switching screens needed
Verifies that wiring tested for load carrying ability meets electrical code recommendations for voltage drop under load
Detects faulty wiring without removing outlets cover plates or panel covers
Finds most common wiring problems, including:
Faulty splices and connections
Incorrect wiring
Undersized wiring
Faulty GFCIs
Faulty or incorrectly wired AFCIs
Incorrect line voltage
Poor ground quality
Flashing screen clearly indicates incorrect wiring or voltage drop test failure
Offers user-selectable 10, 15 and 20 amps load testing to verify electrical system performance
Will not trip circuit breakers or blow fuses during the test
Checks grounding quality for safety and the ability to support sensitive electronic equipment
Measures fault currents
Tests GFCI and AFCI operations
Includes power cord, 9V alkaline battery (Installed), users manual, and carrying case
|
| Load: | Constant 10, 15 or 20 AMP simulation regardless of line voltage | - |
| Operating voltage: | 95 VAC → 140 VAC | +/- 2 % + 2 digits |
| GFI trip: | 6.0 mA nominal to trip GFI, 30 mA to trip RCD | - |
| AFCI trip: | Up to 8, 120 AMP pulses within 1/2 second period | - |
| Specifications |
| Load: | Constant 0, 10, 15 or 20 AMP simulation regardless of line voltage |
| Operating voltage: | 95-140 VAC +/-2%, +/- 2 digits |
| GFI trip: | 6.0 mA nominal to trip GFI, 30 mA to trip RCD |
| AFCI trip: | Up to 8, 120 AMP pulses within 1/2 second period |
For complete specs please download the product datasheet under the “Resources" tab. |
|
| |
0 komentar:
Posting Komentar